IBSA (India Brazil South Africa) Forum

Why in news?

• India organized the IBSA Tourism Ministers’ Meeting to promote tourism cooperation among the member states and reviewed the intra IBSA Tourism cooperation.

• During virtual meeting, the Minister for Tourism, Shri G Kishan Reddy highlighted the aggressive vaccination programme of the Government of India which has completed over 500 million doses of vaccine, making it the 2nd largest country in the world.
• The Ministers emphasised the importance of domestic tourism in reigniting the tourism economy as it can prepare the domestic tourism industry for the arrival of international visitors.
• The IBSA Tourism Ministers’ Meeting recognized the importance of strengthening cooperation in tourism to overcome the impact of Covid 19 pandemic on the tourism sector. The Ministers resolved to work together to realise the full potential of IBSA countries through cooperation in the tourism sector.
• Domestic tourism essential to reignite tourism economy.

About IBSA

• IBSA is a trilateral, developmental initiative between the Government of India, The Government of Federative Republic of Brazil and The Government of the Republic of South Africa to promote South-South cooperation and exchange.
• The aim of the IBSA Tripartite Agreement is for strengthening relations between the member countries for economic development and for promoting cooperation in the field of tourism and expansion of tourism relations with a view to understand and appreciate each other's history, culture and way of life.
• IBSA is a unique Forum which brings together India, Brazil and South Africa, three large democracies and major economies from three different continents, facing similar challenges.
• All three countries are developing, pluralistic, multi-cultural, multi-ethnic, multi-lingual and multi-religious nations.
• The grouping was formalized and named the IBSA Dialogue Forum when the Foreign Ministers of the three countries met in Brasilia on 6 June 2003 and issued the Brasilia Declaration.
• India is current IBSA Chair.

IBSA Summits

• Five IBSA Leadership Summits have been held so far. The 5th IBSA Summit was held in Pretoria on 18 October 2011.
• India as the current IBSA Chair has planned to convene the 6th IBSA summit virtually on 5th September 2021, under the theme “Democracy for Demography and Development”.

IndiGau: India’s first Cattle Genomic Chip

• The data on the Cattle and Livestock Sector of India can be accessed through the 20^th Livestock Census released in 2019.
• Recently, the Government of India released “IndiGau’, India’s first Cattle Genomic Chip for the conservation of pure varieties of indigenous cattle breeds like, Gir, Kankrej, Sahiwal, Ongole etc.

• This indigenous chip was developed by the concerted efforts of scientists of National Institute of Animal Biotechnology (NAIB), Hyderabad, an autonomous institution under the aegis of the Department of Biotechnology.
• IndiGau is purely indigenous and the largest cattle chip of the world.
• It has 11,496 markers (SNPs) more than that placed on 777K Illumina chip of US & UK breeds. This CHIP of our own indigenous cows is a great example of self-reliant India / “Aatma Nirbhar Bharat”.
• This chip will have practical utility in the Governments schemes to achieve the goal of conservation of our own breeds with better characters and help towards doubling of farmers’ income by 2022.
• To further the use of this chip in generating phenotypic and genotypic correlations, NIAB has entered into a collaborative agreement with National Dairy Development Board (NDDB).
• Since NDDB has a well-organized presence in the field for the collection of phenotypic records, NIAB and NDDB complement each other to undertake this research for generating information for low-density SNP chip for any important trait detection, like high milk yield or heat tolerance etc.  This will eventually help in the elite bull selection and improvement of productivity characters of Indian cattle.
• NIAB has also entered into an MoU with private industry to generate capability within India for designing and making our own SNP chips. 
• These may be very low-density SNP chips in the beginning and slowly this technology can be further strengthened for bigger chips, making India self-reliant in this field.

Plastic Waste Management Rules, 2021

Plastic Waste Management is an important problem in India. It is a part of UPSC GS Paper III Biodiversity, Environment and Pollution in India. Before learning about Plastic Waste Management Rules, 2021 it is highly recommended that you watch Ankit Sir's lecture about Plastic Pollution in India and then come back to this legislation since this legislation is a solution to Plastic pollution crisis in India. 

Background

• Plastic has multiple uses and its physical and chemical properties lead to commercial success. However, the indiscriminate disposal of plastic has become a major threat to the environment.
• Pollution due to single-use plastic items has become an important environmental challenge confronting all countries. India is committed to taking action for the mitigation of pollution caused by littered Single Use Plastics.
• In particular, plastic carry bags are the biggest contributors of littered waste and every year, millions of plastic bags end up in the environment vis-a-vis soil, water bodies, water courses, etc and it takes an average of one thousand years to decompose completely.
• Therefore, to address the issue of scientific plastic waste management, the Plastic Waste (Management and Handling) Rules, 2011 were notified in 2011, which included plastic waste management.
• In the 4th United Nations Environment Assembly held in 2019, India had piloted a resolution on addressing single-use plastic product pollution, recognizing the urgent need for the global community to focus on this very important issue. The adoption of this resolution at UNEA 4 was a significant step

Plastic Waste Management Rules, 2016

Aims of PWM Rules, 2016

• Increase the minimum thickness of plastic carry bags from 40 to 50 microns and stipulate a minimum thickness of 50 microns for plastic sheets also to facilitate the collection and recycling of plastic waste.
• Expand the jurisdiction of applicability from the municipal area to rural areas, because plastic has reached rural areas also. Responsibility for the implementation of the rules is given to Gram Panchayat.
• To bring in the responsibilities of producers and generators, both in plastic waste management system and to introduce collect back system of plastic waste by the producers/brand owners, as per extended producers responsibility.
• To introduce collection of plastic waste management fee through pre-registration of the producers, importers of plastic carry bags/multilayered packaging and vendors selling the same for establishing the waste management system.
• Producers are the persons engaged in the manufacture, or import of carry bags, multi-layered packaging and sheets or like and the persons using these for packaging or wrapping their products
• To promote use of plastic waste for road construction as per Indian Road Congress guidelines or energy recovery, or waste to oil etc. for gainful utilization of waste and also address the waste disposal issue;
• To entrust more responsibility on waste generators, namely payment of user charge as prescribed by local authority, collection and handing over of waste by the institutional generator, event organizers.
• Central Pollution Control Board (CPCB) has been mandated to formulate the guidelines for thermoset plastic (plastic difficult to recycle). In the earlier Rules, there was no specific provision for such type of plastic.
• State Pollution Control Board (SPCBs) will not grant/renew registration of plastic bags, or multi-layered packaging unless the producer proposes the action plan endorsed by the concerned State Development Department.
• Producers to keep a record of their vendors to whom they have supplied raw materials for manufacturing carry bags, plastic sheets, and multi-layered packaging. This is to curb manufacturing of these products in unorganised sector.
• The entry points of plastic bags/plastic sheets/multi-layered packaging in to commodity supply chain are primarily the retailers and street vendors. They have been assigned the responsibility of not to provide the commodities in plastic bags/plastic sheets/multi-layered packaging which do not conform to these rules. Otherwise, they will have to pay the fine.
• Plastic carry bag will be available only with shopkeepers/street vendors pre-registered with local bodies on payment of certain registration fee. The amount collected as registration fee by local bodies is to be used for waste management.
• Manufacturing and use of non-recyclable multi-layered plastic to be phased in two years

Analysis of PWM Rules, 2016

• Rural areas have been brought in ambit of these Rules for the first time.
• First time, responsibility of waste generators is being introduced. Individual and bulk generators like offices, commercial establishments, industries are to segregate the plastic waste at source, handover segregated waste, pay user fee as per bye-laws of the local bodies.
• First time, persons organising public events like marriages, religious gatherings have been made responsible for management of waste.
• Use of plastic sheet for packaging, wrapping the commodity are brought under the ambit of these rules.
• Extended Producer Responsibility: Earlier, EPR was left to the discretion of the local bodies. First time, the producers and brand owners have been made responsible for collecting waste generated from their products. They have to approach local bodies for formulation of plan/system for the plastic waste management within the prescribed timeframe.
• The waste management infrastructure in the States/UTs is being strengthened through the Swachh Bharat Mission.

The following steps have also been taken to strengthen implementation of Plastic Waste Management Rules, 2016 and also to reduce the use of identified single use plastic items:

• The States/UTs have been requested to constitute a Special Task Force for elimination of single use plastics and effective implementation of Plastic Waste Management Rules, 2016.
• A National Level Taskforce has also been constituted by the Ministry for taking coordinated efforts to eliminate identified single use plastic items and effective implementation of Plastic Waste Management Rules, 2016.
• The State /UT Governments and concerned Central Ministries/Departments have also been requested to develop a comprehensive action plan for elimination of single use plastics and effective implementation of Plastic Waste Management Rules, 2016, and its implementation in a time bound manner.
• Directions under Section 5 of Environment (Protection) Act, 1986, have been issued to all States/Union Territories inter alia for setting up for institutional mechanism for strengthening enforcement of Plastic Waste Management (PWM) Rules, 2016.
• The Government has also been taking measures for awareness generation towards elimination of single use plastics and effective implementation of Plastic Waste Management Rules, 2016.
• To encourage innovation in development of alternatives to identified single use plastic items and digital solutions to plastic waste management, the India Plastic Challenge – Hackathon 2021, has been organized for students of Higher Educational Institutions and startups recognized under Startup India Initiative.

Plastic Waste Management (Amendment) Rules, 2018

• The amended Rules lay down that the phasing out of Multilayered Plastic (MLP) is now applicable to MLP, which are "non-recyclable, or non-energy recoverable, or with no alternate use."
• Centralized Registration System

1. The amended Rules also prescribe a central registration system for the registration of the producer/importer/brand owner.
2. The Rules also lay down that any mechanism for the registration should be automated and should take into account ease of doing business for producers, recyclers and manufacturers.
3. The centralised registration system will be evolved by Central Pollution Control Board (CPCB) for the registration of the producer/importer/brand owner.

• While a national registry has been prescribed for producers with presence in more than two states, a state-level registration has been prescribed for smaller producers/brand owners operating within one or two states.
• In addition, Rule 15 of the Plastic Waste Management (Amendment) Rules 2018 on "explicit pricing of carry bags" has been omitted.

Plastic Waste Management Amendment Rules, 2021

Keeping in view the adverse impacts of littered plastic on both terrestrial and aquatic ecosystems, the MOEFCC, has notified the Plastic Waste Management Amendment Rules, 2021 on August 12, 2021.

• The rules prohibits identified single use plastic items which have "low utility and high littering potential" by 2022. 
• The manufacture, import, stocking, distribution, sale and use of following single-use plastic, including polystyrene and expanded polystyrene, commodities shall be prohibited with effect from the 1st July, 2022:-

1. ear buds with plastic sticks, plastic sticks for balloons, plastic flags, candy sticks, ice-cream sticks, polystyrene [Thermocol] for decoration;
2. plates, cups, glasses, cutlery such as forks, spoons, knives, straw, trays, wrapping or packing films around sweet boxes, invitation cards,  and cigarette packets, plastic or PVC banners less than 100 micron, stirrers.

• In order to stop littering due to light weight plastic carry bags, with effect from 30th September, 2021, the thickness of plastic carry bags increased from 50 to 75 microns from 30th September, 2021 and to 120 microns with effect from the 31st December, 2022. This will also allow reuse of plastic carry due to increase in thickness.
• The plastic packaging waste, which is not covered under the phase out of identified single use plastic items, shall be collected and managed in an environmentally sustainable way through the Extended Producer Responsibility of the Producer, importer and Brand owner (PIBO), as per Plastic Waste Management Rules, 2016.
• For effective implementation of EPR, the Guidelines for EPR being brought out have been given legal force through Plastic Waste Management Amendment Rules, 2021.

Conclusion

• An eco-friendly product, which is a complete substitute of the plastic in all uses, has not been found till date. In the absence of a suitable alternative, it is impractical and undesirable to impose a blanket ban on the use of plastic all over the country. The real challenge is to improve plastic waste management systems.

You can get the Handout on this link: Click here